Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 706

33
Obsolete and Discontinued Commands
Obsolete Command
:TIMebase:DELay (see
page
:TRIGger:THReshold (see
page
:TRIGger:TV:TVMode (see
page
Discontinued Discontinued commands are commands that were used by previous
Commands
oscilloscopes, but are not supported by the InfiniiVision 2000 X- Series
oscilloscopes. Listed below are the Discontinued commands and the
nearest equivalent command available (if any).
Discontinued Command
ASTore
CHANnel:MATH
CHANnel<n>:PROTect
DISPlay:INVerse
DISPlay:COLumn
DISPlay:FREeze
DISPlay:GRID
DISPLay:LINE
DISPlay:PIXel
DISPlay:POSition
DISPlay:ROW
DISPlay:TEXT
FUNCtion:MOVE
706
748)
749)
750)
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Current Command Equivalent
:TIMebase:POSition (see
page 580) or
:TIMebase:WINDow:POSition
(see page 585)
:POD<n>:THReshold (see
page 414) or
:DIGital<d>:THReshold (see
page 249)
:TRIGger:TV:MODE (see
page 623)
Current Command Equivalent
:DISPlay:PERSistence INFinite
(see page 261)
:FUNCtion:OPERation (see
page 289)
:CHANnel<n>:PROTection
(see page 232)
none
none
none
none
none
none
none
none
none
none
Behavior Differences
TIMebase:POSition is position
value of main time base;
TIMebase:WINDow:POSition
is position value of zoomed
(delayed) time base window.
Comments
ADD not included
Previous form of this
command was used to
enable/disable 50
protection. The new command
resets a tripped protect and
the query returns the status of
TRIPed or NORMal.