Agilent Technologies Medalist i3070 Series 5i Operator's Manual
Inline ict system
Hide thumbs
Also See for Medalist i3070 Series 5i:
- Manual (181 pages) ,
- System installation (46 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Agilent Technologies Medalist i3070 Series 5i
Summary of Contents for Agilent Technologies Medalist i3070 Series 5i
- Page 1 Medalist i3070 Series 5i Inline ICT System Operator Guide...
-
Page 2: Safety Notices
Manual Part Number merchantability and fitness for a particular fully understood and met. purpose. Agilent shall not be liable for E9988-90001 errors or for incidental or consequential damages in connection with the furnishing, WARNING... - Page 3 Medalist i3070 Series 5i Inline ICT System Operator Guide Safety Information Overview of the System Logging In to the System Production Testing...
-
Page 4: Safety Information
Safety Information Warning and Hazard Labels Pay attention to the following labels when they appear on the equipment. Table 1 Warning Labels on System Label Description DANGER: High Voltage Do not detach the protective covers. Operating this equipment without covers may cause electric shock. WARNING: Moving Parts (General) Do not touch the equipment while it is running. -
Page 5: Overview Of The System
Overview of the System Figure 1 Medalist i3070 Series 5i (Left-to-Right System) Zone 2 Zone 1 Tower Light Main Power Switch LCD Touch Panel Reset Button Emergency Stop Switch Connectors for Anti-static Wrist Strap Controller Pod Testhead Pod Tower Light Green System is running in Auto Mode. -
Page 6: Logging In To The System
Logging In to the System Log in to Windows with the user name and password provided by your administrator. The Operator Interface starts automatically. Logging Off Before you log off, make sure you exit the Operator Interface. 1 From the File menu, select Exit. 2 In Windows, select Start >... -
Page 7: Production Testing
Production Testing Wear an anti-static wrist strap at all times when handling PCBs which are susceptible to CAUTION damage by electrostatic discharge. Connectors for the wrist strap are provided at the front of the system (see Figure 1 From the Operator Interface, click LOAD to automatically load the testplan for the fixture in use. - Page 8 1 Open the DUT Access window and remove the board from the Zone 2 conveyor. 2 Press OK on the touch panel. 3 Close the DUT Access window and press OK to lock it. The system will automatically resume operation. © Agilent Technologies, Inc. 2013 Printed in Malaysia First edition, December 2013 E9988-90001...