Wgen:function:pulse:width - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:WGEN:FUNCtion:PULSe:WIDTh

Command Syntax
:WGEN:FUNCtion:PULSe:WIDTh <width>
<width> ::= pulse width in seconds in NR3 format
For Pulse waveforms, the :WGEN:FUNCtion:PULSe:WIDTh command
specifies the width of the pulse.
The pulse width can be adjusted from 20 ns to the period minus 20 ns.
Query Syntax
:WGEN:FUNCtion:PULSe:WIDTh?
The :WGEN:FUNCtion:PULSe:WIDTh? query returns the currently set pulse
width.
Return Format
<width><NL>
<width> ::= pulse width in seconds in NR3 format
See Also
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"Introduction to :WGEN Commands"
":WGEN:FUNCtion" on page 667
:WGEN Commands
on page 665
31
669