Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 707

Discontinued Command
FUNCtion:PEAKs
HARDcopy:ADDRess
MASK
SYSTem:KEY
TEST:ALL
TRACE subsystem
TRIGger:ADVanced subsystem
TRIGger:TV:FIELd
TRIGger:TV:TVHFrej
TRIGger:TV:VIR
VAUToscale
Discontinued
Some previous oscilloscope queries returned control setting values of OFF
Parameters and ON. The InfiniiVision 2000 X- Series oscilloscopes only return the
enumerated values 0 (for off) and 1 (for on).
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Obsolete and Discontinued Commands
Current Command Equivalent
none
none
none
none
*TST (Self Test) (see page 145)
none
:TRIGger:TV:MODE (see
page 623)
none
none
Comments
Only parallel printer port is
supported. GPIB printing not
supported
All commands discontinued,
feature not available
All commands discontinued,
feature not available
Use new GLITch, PATTern, or
TV trigger modes
33
707