Trigger:pattern:qualifier - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

29
:TRIGger Commands

:TRIGger:PATTern:QUALifier

Command Syntax
:TRIGger:PATTern:QUALifier <qualifier>
<qualifier> ::= ENTered
The :TRIGger:PATTern:QUALifier command qualifies when the trigger
occurs.
In the InfiniiVision 2000 X- Series oscilloscopes, the trigger always occurs
when the pattern is entered.
Query Syntax
:TRIGger:PATTern:QUALifier?
The :TRIGger:PATTern:QUALifier? query returns the trigger duration
qualifier.
Return Format
<qualifier><NL>
See Also
•
620
(see page 790)
"Introduction to :TRIGger Commands"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 589