31
:WGEN Commands
:WGEN:FUNCtion:RAMP:SYMMetry
Command Syntax
:WGEN:FUNCtion:RAMP:SYMMetry <percent>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
For Ramp waveforms, the :WGEN:FUNCtion:RAMP:SYMMetry command
specifies the symmetry of the waveform.
Symmetry represents the amount of time per cycle that the ramp
waveform is rising.
Query Syntax
:WGEN:FUNCtion:RAMP:SYMMetry?
The :WGEN:FUNCtion:RAMP:SYMMetry? query returns the currently set
ramp symmetry.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also
•
•
670
(see
page
790)
"Introduction to :WGEN Commands"
":WGEN:FUNCtion"
on page 667
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 665