Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 83

Table 17 :MEASure Commands Summary (continued)
Command
:MEASure:DEFine
THResholds,
<threshold spec> (see
page 344)
:MEASure:DELay
[<source1>]
[,<source2>] (see
page 347)
:MEASure:DUTYcycle
[<source>] (see
page 349)
:MEASure:FALLtime
[<source>] (see
page 350)
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Query
:MEASure:DEFine?
THResholds (see
page 345)
:MEASure:DELay?
[<source1>]
[,<source2>] (see
page 347)
:MEASure:DUTYcycle?
[<source>] (see
page 349)
:MEASure:FALLtime?
[<source>] (see
page 350)
Commands Quick Reference
Options and Query Returns
<threshold spec> ::= {STANdard} |
{<threshold mode>,<upper>,
<middle>,<lower>}
<threshold mode> ::= {PERCent |
ABSolute}
<source1,2> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::=
floating-point number delay time
in seconds in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>} for
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion | MATH |
WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= ratio of
positive pulse width to period in
NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>} for
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion | MATH |
WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= time in
seconds between the lower and
upper thresholds in NR3 format
4
83