Status - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:STATus

Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS1 | WMEMory<r>}
<source> ::= {CHANnel<n> | DIGital<d> | POD{1 | 2}
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :STATus? query reports whether the channel, function, or serial
decode bus specified by <source> is displayed.
MATH is an alias for FUNCtion.
N O T E
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also •
•
•
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
for the DSO models
| BUS{1 | 2} | FUNCtion | MATH | SBUS1 | WMEMory<r>}
for the MSO models
"Introduction to Root (:) Commands"
":BLANk" on page 158
":CHANnel<n>:DISPlay"
":DIGital<d>:DISPlay"
":FUNCtion:DISPlay"
":POD<n>:DISPlay" on page 412
":WMEMory<r>:DISPlay"
":VIEW" on page 182
on page 150
on page 222
on page 245
on page 280
on page 696
6
Root (:) Commands
179