Trigger[:Edge]:Level - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:TRIGger[:EDGE]:LEVel

Command Syntax
:TRIGger[:EDGE]:LEVel <level>
<level> ::= <level>[,<source>]
<level> ::= 0.75 x full-scale voltage from center screen in NR3 format
<level> ::= ±(external range setting) in NR3 format
<level> ::= ±8 V for digital channels (MSO models)
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d> | EXTernal}
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger[:EDGE]:LEVel command sets the trigger level voltage for the
active trigger source.
If the optional source is specified and is not the active source, the level on the active source
N O T E
is not affected and the active source is not changed.
Query Syntax
:TRIGger[:EDGE]:LEVel? [<source>]
The :TRIGger[:EDGE]:LEVel? query returns the trigger level of the current
trigger source.
Return Format
<level><NL>
See Also
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
for internal triggers
for external triggers
for the MSO models
"Introduction to :TRIGger Commands"
":TRIGger[:EDGE]:SOURce"
":EXTernal:RANGe" on page 274
":POD<n>:THReshold"
":DIGital<d>:THReshold"
on page 589
on page 606
on page 414
on page 249
29
:TRIGger Commands
603