Waveform:type - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

30
:WAVeform Commands

:WAVeform:TYPE

Query Syntax
:WAVeform:TYPE?
The :WAVeform:TYPE? query returns the acquisition mode associated with
the currently selected waveform. The acquisition mode is set by the
:ACQuire:TYPE command.
Return Format
<mode><NL>
<mode> ::= {NORM | PEAK | AVER | HRES}
If the :WAVeform:SOURce is POD1 or POD2, the type is always NORM.
N O T E
See Also
•
•
•
•
•
654
(see page 790)
"Introduction to :WAVeform Commands"
":ACQuire:TYPE" on page 195
":WAVeform:DATA" on page 637
":WAVeform:PREamble"
":WAVeform:SOURce"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 629
on page 644
on page 649