Hardcopy:network:slot - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:HARDcopy:NETWork:SLOT

Command Syntax
:HARDcopy:NETWork:SLOT <slot>
<slot> ::= {NET0 | NET1}
The :HARDcopy:NETWork:SLOT command selects the network printer slot
used for the address and apply commands. There are two network printer
slots to choose from.
Query Syntax
:HARDcopy:NETWork:SLOT?
The :HARDcopy:NETWork:SLOT? query returns the currently selected
network printer slot.
Return Format
<slot><NL>
<slot> ::= {NET0 | NET1}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"Introduction to :HARDcopy Commands"
":HARDcopy:NETWork:APPLy"
":HARDcopy:NETWork:ADDRess"
":HARDcopy:NETWork:DOMain"
":HARDcopy:NETWork:USERname"
":HARDcopy:NETWork:PASSword"
on page 296
on page 304
on page 303
on page 305
on page 308
on page 306
17
:HARDcopy Commands
307