Lister:reference - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

18
:LISTer Commands

:LISTer:REFerence

Command Syntax
:LISTer:REFerence <time_ref>
<time_ref> ::= {TRIGger | PREVious}
The :LISTer:REFerence command selects whether the time value for a
Lister row is relative to the trigger ot the previous Lister row.
Query Syntax
:LISTer:REFerence?
The :LISTer:REFerence? query returns the Lister time reference setting.
Return Format
<time_ref><NL>
<time_ref> ::= {TRIGger | PREVious}
See Also •
•
•
•
316
(see page 790)
"Introduction to :LISTer Commands"
":SBUS<n>:DISPlay" on page 450
":LISTer:DATA" on page 314
":LISTer:DISPlay" on page 315
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 313