Trigger:glitch:polarity - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

29
:TRIGger Commands

:TRIGger:GLITch:POLarity

Command Syntax
:TRIGger:GLITch:POLarity <polarity>
<polarity> ::= {POSitive | NEGative}
The :TRIGger:GLITch:POLarity command sets the polarity for the glitch
pulse width trigger.
Query Syntax
:TRIGger:GLITch:POLarity?
The :TRIGger:GLITch:POLarity? query returns the glitch pulse width trigger
polarity.
Return Format
<polarity><NL>
<polarity> ::= {POS | NEG}
See Also
•
•
•
612
(see page 790)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 598
":TRIGger:GLITch:SOURce"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 589
on page 615