Operation Status Condition Register (:Operegister:condition) - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

Operation Status Condition Register (:OPERegister:CONDition)

The Operation Status Condition Register register hosts these bits:
Name
RUN bit
WAIT TRIG bit
MTE bit
OVLR bit
The :OPERegister:CONDition? query returns the value of the Operation
Status Condition Register.
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Location Description
bit 3 Is set whenever the instrument is not stopped.
bit 5 Is set by the Trigger Armed Event Register and
indicates that the trigger is armed.
bit 9 Comes from the Mask Test Event Registers.
bit 11 Is set whenever a 50 input overload occurs.
35
Status Reporting
773