Altigen AltiContact Manager Version 5.0 Administration Manual page 410

Queue Management
• Extension—select an extension from the drop-down list.
• Workgroup—select a workgroup from the drop-down list.
• IVR—select the IVR number to use in the drop-down list under
the option. IVR settings are established in IVR... on the
Management menu.
• Operator
• Outside—select a trunk or route access code to use in the small
drop-down list on the left, and type in the full prefix and phone
number.
Note: Forwarding calls to a pager is possible but not
Selecting existing calls to be overflowed is based on the following
criteria:
— If Calls in Queue Exceeds criteria is met, the call with the highest
priority and longest priority queue time is overflowed.
— If Wait Time Longer Than or Service Level Lower Than criteria
is met, the call with the longest queue time is overflowed.
15-36 AltiContact Manager Administration Manual
recommended since callers will only hear what is heard
when calling a pager and will not know to enter a return
phone number unless instructed.