Table of Contents
Advertisement
MVIP Test Tool
MVIP Test Tool
The MVIP Test Tool is a tool that detects one-way connection, cross talk,
bad MVIP cable and static noise problems.
To run MVIP Test Tool:
1.
Stop AltiGen Switching Services before running this utility.
2.
Launch MVIP Test Tool from AltiWare>AltiWare Tools on the
Windows Start button.
3.
Click Start to begin test.
4.
If the MVIP Test encounters an error, click Yes or No to view the error
report.
5.
At the end of the test, the utility will provide pass or fail results.
DINA Manager
DINA Manager is GUI-based application designed to help a customer
configure several distributed AltiContact systems synchronously to work
as just one AltiContact Manager system. The application can be run on any
server, local or remote to an AltiContact Manager system, which has a
connection for access to all the servers that are desired to be managed. The
application will synchronize extensions and workgroup pilot numbers. It
can complete the functions below for multiple systems from a single
location and session:
•
Create virtual extensions with the correct forwarding parameters for
multiple servers for specific extensions desired to be managed.
•
Synchronize the extensions with same number in all systems so that all
calls to the extension will be presented to the appropriate AltiContact
Manager system.
•
Synchronize the extensions with same number in all systems so that all
voice mails to the extension will be presented to the appropriate
AltiContact Manager system.
•
Delete extensions from multiple systems.
Note:
DINA Manager can only launch the same AltiWare versions of the
server that DINA Manager is located. For example, if AltiWare OE
4.6 is located same server as DINA Manager, only systems running
OE 4.6 can be launched by DINA Manager.
25-6 AltiContact Manager Administration Manual
Advertisement
Table of Contents
Troubleshooting
