Changing The Password; Stopping The Altigen Switching Service - Altigen AltiContact Manager Version 5.0 Administration Manual

Getting Around ACM Administrator
To log out, click the Logout icon (second icon from the left of the toolbar),
or select Logout from the Services menu.
The logout option in the Services menu allows the system administrator to
logout of the system. You should always log out after you have completed
the administrative or configuration tasks. This will prevent unauthorized
persons from accessing the AltiContact Manager configuration functions.
AltiContact Manager telephony functions continue to run in the
background on the ACM Administrator.

Changing the Password

Change the password frequently to prevent unauthorized access to the
system. You can change the password only if you're already logged in.
Select Change Password from the Services menu to open a Change
Password dialog box. You'll be prompted type in and verify the new
password and then click OK.

Stopping the AltiGen Switching Service

Normally, when you exit AltiContact Manager, the AltiGen services that
provide the various telephony and data services remain active—they are
needed to run the system, of course. If you need to shut the entire system
down, select the Stop Switching Service option from the Services menu.
This stops the AltiContact Manager system services, including the
AltiContact Manager application itself. When you re-open AltiContact
Manager, the switching services are reactivated.
This option is available when you are logged in at the AltiContact Manager
system computer; it is not available from a remote AltiContact Manager
client.
AltiContact Manager Administration Manual 4-11