Trunk View Window - Altigen AltiContact Manager Version 5.0 Administration Manual

Getting Around ACM Administrator

Trunk View Window

The Trunk View window displays the status of all assigned trunks.
Figure 5. Trunk View window
The radio button to the left of each trunk location is green when the trunk
is idle, and red when the extension is not ready or in use. The location
format is slot:channel—for example, channel 3 on the board in slot 9 is
location 09:03.
You can double click any trunk location to open the Trunk Configuration
window for the selected trunk.
The Reset button resets the selected trunk(s) to the idle status. You'll be
asked to confirm the reset and a status message will tell you if the reset was
successful. You can select and reset multiple trunks.
AltiContact Manager Administration Manual 4-7