Altigen AltiContact Manager Version 5.0 Administration Manual page 185

Use the Board Configuration window for the Quantum board to view the
following attributes:
Parameter
Board Info
Channel Mapping
List
Span Info
Description
Board Logical ID: assigned by AltiContact
Manager.
Board Name: the type of board installed in the
system and board ID.
Note: For Quantum boards in a Windows 2000
system:
•
the physical board ID 0 is not supported
•
the valid physical board IDs are 1–15
Logical Channel, Physical Span, and Physical
Channel for the entire board.
To reset the channel, select the channel to reset and
click the Reset Channel button, then click OK.
Note: Depending on whether the channel is a line or
a trunk line, double clicking a channel in this
window invokes either a Line Properties
window (see "Quantum Line Properties" on
page 13-11, or a Trunk Line Properties
window (see "Quantum Trunk Properties" on
page 7-5).
Not available for Quantum boards.
AltiContact Manager Administration Manual
Board Configuration
6-3