Altigen AltiContact Manager Version 5.0 Administration Manual page 187

Figure 4. Board Configuration window (Triton Analog)
Use the Board Configuration window to view the following attributes:
Parameter
Board Info
Channel Mapping
List
Span Info
Description
Board Logical ID: assigned by AltiContact
Manager.
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
and click the Reset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokes a channel configuration window.
Refer to the Line Properties button in
Extension Configuration. See "Triton Analog
Station Line Properties" on page 13-12.
Not available for Triton Analog Station boards.
AltiContact Manager Administration Manual
Board Configuration
6-5