Alert Groups - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Alert Groups

Figure 18. SNMP Alert Groups Configuration
Specifies which alert groups are enabled for reporting for this
configuration. When an alert occurs that is contained in one of the
enabled alert groups, it will be posted to the specified SNMP
manager, Unix syslog daemon, and/or e-mail address. The
following table describes which printer events belongs to which
Alert Group.
Table 5. Alert Groups and Printer Events
Alert Group
Offline
Warning
SNMP Configuration
Parallel Port (PRN)
Printer Events
Printer is Offline
Hold Print Time Out
COMM Check
Invalid Address
CU Time Out
CU Not Enabled
File System Full
File Exist
Hex Dump Mode
Half Speed Mode
Printer Warm
Print Head Warm
2B-Toner Density Too High
2C-Toner Density Too Low
63