IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 263

store pserver tcpsocket TCPportnumber dest destination
example: store pserver tcpsocket 5000 dest d1prn
Assign a pre-defined TCPportnumber to a particular
destination on the Ethernet Interface. Therefore, if you are
using a print method that sends jobs directly to a TCP port
number, you still have the option to process the job data
through this destination setting.
SMART
store pserver novell passwd password
example: store pserver novell passwd mplex
Store the password for the Ethernet Interface to use when
logging in to a Novell file server. This password would have to
match one set on the file server.
SMART
store pserver novell fserver add|del fileservername
example: store pserver novell fserver add fs1
Add or remove a server entry on the Ethernet Interface for the
Novell file server it will be servicing.
SMART
store pserver novell frametype 802.2|802.3|802.2 smap|
autosense]
Sets the frame type for the Novell protocol.
store pserver from current
Store all current general print server settings to flash memory
so they are retained after a power cycle. This ensures all
current settings match what is stored in flash memory.
store pserver from default
Set all general print server settings back to factory defaults.
SMART
store pserver novell user name username
example: store pserver novell user name micro1
Define a username on the Ethernet Interface to be used when
it logs in to a Novell file server to find information. This
username must match a user pre-defined on the Novell file
server.
Store Commands
263