IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 165

RPRINTER/NPRINTER Setup (Netware 3.x, Netware 4.x, and Netware 5.x)
3. You should see a prompt with the Ethernet Interface's IP
address:
ipaddress:root>
4. At the prompt, store the RPRINTER settings on the Ethernet
Interface. The pservername refers to the existing
PSERVER.NLM on the file server created in step 1.
Syntax:
store rprinter add pservername printernumber
EthernetInterfacedestination
An example of an RPRINTER servicing printer 0 of the
PSERVER.NLM called pserver1 and sending jobs to the
Ethernet Interface destination d1prn is:
store rprinter add pserver1 0 d1prn
NOTE: If it is an NDS pserver, enter only the PSERVER name and
not the context (e.g., sales_ps).
5. Physically repower the printer to make the new settings take
effect.
Wait two minutes and then check your PSERVER to see if the
appropriate printer is being serviced. The printer should display a
message such as "Waiting for job." At this point, the Ethernet
Interface knows to receive any jobs this PSERVER.NLM has to
send to it through the defined printer.
165