Configuring A Default Router/Gateway; Changing Workgroup Names - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 4
Windows Ethernet Interface Configuration

Configuring A Default Router/Gateway

To configure a default router/gateway using the Ethernet Interface
internal command shell, npsh:
1. Telnet to the Ethernet Interface, and log in as root with no
password.
2. At the system prompt, enter the command to store the default
router/gateway address:
store tcpip route add default routerIPaddress 1
(e.g., store tcpip route add default 192.75.12.0 1)
3. Repower the printer to have the stored setting to take effect.

Changing Workgroup Names

Windows environments define groups of related computers as
"workgroups." By default, "WORKGROUP" is the name that is
assigned to the Ethernet Interface workgroup. However, you may
want to change this to suit your network better. To do this using
HTML forms:
SMART
1. Load a Web browser on your Windows station and direct it to
the URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a "User ID" and password first, type in root
2. At the "Network Configuration" HTML form that displays,
search for the "Windows (NetBIOS TCP/IP)" section and
highlight the "Workgroup Name" field.
3. Type in the new workgroup name for the Ethernet Interface.
4. Click on the SUBMIT button when done and physically repower
the print server to make the new settings take effect.
78
for the ID and press ENTER at the password prompt (since
there is no password by default).