Rprinter/Nprinter Setup (Netware 3.X, Netware 4.X, And Netware 5.X) - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

RPRINTER/NPRINTER Setup (Netware 3.x, Netware 4.x, and Netware 5.x)

RPRINTER/NPRINTER Setup
(Netware 3.x, Netware 4.x, and Netware 5.x)
This procedure associates an existing PSERVER with a remote
Ethernet Interface acting as a RPRINTER/NPRINTER in a Netware
3.x, Netware 4.x, or Netware 5.x environment. It is the PSERVER's
responsibility to get jobs from the queue and to pass them off to the
Ethernet Interface acting as the remote printer. Unlike a PSERVER
setup, the Ethernet Interface does not deal directly with the queues.
NOTE: As a RPRINTER/NPRINTER, the print server does not use
a login ID. A non-Ethernet Interface print server such as
PSERVER.NLM or PSERVER.EXE must be running for
RPRINTER to operate. Also, if the Ethernet Interface loses
a connection to a PSERVER, it will automatically reconnect
when that server becomes available again.
The following steps assume that you have created a PSERVER
object in Netware 3.x, Netware 4.x, or Netware 5.x and have
assigned printers and queues to it. If you have not already done
this, do it now. The setup is similar to creating a PSERVER setup
for the Ethernet Interface, except that there are no restrictions
about which names may be used for the print server and printer
objects.
NOTE: Write down the printer number(s) assigned to the printer(s)
you are going to be using for this setup. You will need them
in a later step.
HTML Method
1. Load a PSERVER on your Netware 3.x, Netware 4.x, or
Netware 5.x file server (i.e., issue a load pserver
pservername command on the file server).
NOTE: If it is an NDS PSERVER on a Netware 4.x/5.x file server,
you must specify the PSERVER name and context for
pservername. For example:
load pserver .sales_ps.sales.microplex
2. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
163