IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 306

Chapter
EEPROM
factory defaults
Factory Settings
Firmware Panic
Flash
FTP
gateway
gateway address
Hardware Exception
HTML
ifnum
interface script
I/O port
306
Electrically Erasable/Programmable Read-
Only Memory.
Settings shipped with the NIC.
S2 jumper position stating all factory
default settings are to be used while the
NIC is up and running.
Unrecoverable errors detected by the NIC
firmware force the Print Server into
Firmware Panic mode. Manually reset the
NIC to resume operation.
Stores firmware code and configurable
settings. Allows for upgrades without
replacing hardware inside the NIC.
File Transfer Protocol. Used for
transferring files from one TCP/IP host to
another and used in the upgrade process.
A hardware device that translates data
between two incompatible networks.
The IP address of a gateway.
Bus errors, address errors, and illegal
instructions force the NIC into this
NIC non-operational mode.
HyperText Markup Language. Format
used for documents viewable on the World
Wide Web.
Interface Number. Represents the network
interface. With a NIC, this will always be
"1" for Ethernet.
Unix host filter file that processes the print
job before it is sent over the network to the
NIC.
Port for attaching peripherals to. The NIC
provides four: PRN1, PRN2, COM1,
COM2.