Set Commands - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Set Commands

These settings alter the current or working settings in memory only.
Therefore, they will be lost if the Ethernet Interface is power cycled.
To ensure this does not happen, issue a save command so the
current settings get written to flash memory.
set dest destination name newname
example: set dest d1prn name thermal
Change the current name of the destination to a new name
as indicated by newname. This newname must be nine
characters or less or it will be truncated. These names are case
sensitive.
set dest destination backchannel prn [prn]
example: set dest d1prn backchannel prn
Establish a return path for printer feedback for a given
destination. The Ethernet Interface I/O port is bi-directional,
however, you will most likely use the same I/O port to which the
destination is currently sending jobs.
set dest destination model modelname
example: set dest d1prn model m4
Associate a model with a destination. Jobs sent to the named
destination are processed according to the options defined
in the named model.
set dest destination logpath logpathname
example: set dest d1prn logpath l4
Associate a logpath with a destination. Jobs sent to the named
destination are logged according to the settings defined in
the named logpath.
Set Commands
267