IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 270

Chapter 15
Complete Command List
SMART
set model model name newname
example: set model m1 name landscape
Change the current name of the model to a new name as
indicated by newname. This newname must be nine characters
or less or it will be truncated. These names are case sensitive.
SMART
set model model type raw
example: set model m2 type raw
Set the model type to raw so that it does not process the data
passing through it in any way.
SMART
set model model banner [ps|text|auto [after]]
example: set model m2 banner text
Determine whether a banner page should be added for print
jobs passing through the model mapped destination/queue.
auto will determine which type is needed depending on the
type of print job data passing through. By default, banner pages
are added to the front of the job. If after is set, the banner
page will come at the end.
SMART
set model model stty [[-]onlcr]
tablength|none]
example: set model m3 stty onlcr
Control extra job processing done by the model. The
processing options are:
onlcr
descramble
xtab
270
[[-]descramble] [xtab
Carriage return insertion for Unix text jobs.
Adds carriage returns to text jobs with solitary
linefeeds. This will prevent stair-stepped
output or output running off the right side of
the page.
Automatic descrambling of print jobs passing
through which have been scrambled using
Printronix proprietary Unix scramble utility,
npscramble.
Tab expansion from 1 to 16 spaces.