IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 91

9. Complete the Port Settings tab as desired:
•
Raw. (The default.) Make sure "Raw" is selected in the
"Protocol" field. Leave the setting at 9100 (the default) in
the "Raw Settings Port Number" field.
•
LPR. To select the LPR setting, click "LPR" in the "Protocol"
field. In lowercase characters, type the desired queue
name of d1prn through d8prn in the "LPR Settings Queue
Name" field.
•
SNMP Status Enable. Check the "SNMP Status Enable"
box if you want the status returned using SNMP. You must
also enter the appropriate information in the "Community
Name" and "SNMP Device Index" fields.
Upon completion, click "OK." The Port Settings text box
disappears and the Additional Port Information Required dialog
box reappears.
Windows 2000/XP Host Setup
91