IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 16

Chapter 1
Overview
•
Ethernet configuration via the printer front panel
•
Ethernet print job cancel via the printer front panel
•
Ethernet test page printing via the front panel
•
Enabling of feature modes such as TCP/IPDS and TN5250
•
Acknowledgement of XOJ, beginning and end of job.
Basic Ethernet And Print Server HTML Forms
All print server embedded web page functionality is disabled. The
ability to enable the HTML forms via the "config http on" telnet shell
command is disabled.
Basic Ethernet And Novell Protocol Support
Novell protocol support is disabled. As a result, the following telnet
shell (NPSH) commands are unavailable:
•
store rprinter
•
store pserver novell
•
set dest <DEST> service rprinter
•
set dest <DEST> service pserver
NOTE: Versions of Novell that support printing via LPR over TCP/
Basic Ethernet And SNMP Support
SNMP manager and SNMP trap settings are disabled.
Consequently, e-mail and syslog daemon printer alerts, and SNMP
traps are disabled.
Basic Ethernet And Print Path Model
The ability to associate printer configurations with a logical print
path model is disabled. The "set model <MODEL> config"
command will not be available.
16
IP will allow the Basic NIC to be used.