Configuring As/400 For Ascii Using Tcp/Ip; Configuring With Addtcpifc - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

User manual
Table of Contents

Advertisement

The following three parameters must be specified:
Line Description (LIND)
The line description name is the user's name for the AS/400
adapter. This name must be identical to the name entered when the
TCP/IP is configured on the AS/400.
Resource Name (RSRCNAME)
The system-assigned name for the interface (for example, LIN041).
SSAP
When *CALC is used, the values of "12" and "AA" are entered
automatically as defaults. Verify that those SSAP values have not
been changed.

Configuring AS/400 For ASCII Using TCP/IP

The next step is to configure the interface on the AS/400 for
TCP/IP.
NOTE: The AS/400 interface is not the Ethernet Interface. Do not

Configuring With ADDTCPIFC

ADDTCPIFC is used to add a TCP/IP interface to the AS/400. This
step configures the AS/400 for attachments to a TCP/IP network.
At the AS/400 command line, enter the following command:
ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN)
SUBNETMASK('255.255.255.0')
Your completed screen should look like Figure 26.
set the AS/400 interface address to the same address as
the Ethernet Interface IP address. Also, do not add the
Ethernet Interface to the AS/400 TCP/IP interface list.
Configuring With ADDTCPIFC
187

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4400 series

Table of Contents