Snmp Configuration - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 3

SNMP Configuration

SNMP Configuration
SMART
The SNMP Configuration form allows you to configure SNMP trap
managers and the e-mail alert features of the Ethernet Interface. It
allows you to configure how SNMP alerts are processed by a
SNMP trap manager, an Unix syslog logging daemon, and/or have
e-mail notifications sent. Up to 10 SNMP trap managers and e-mail
recipients may be specified. Individual alerts fall into one of 12 alert
group categories, providing the ability to filter alert notices as
desired.
SNMP Manager Alert Posting Settings
Figure 15. SNMP Manager Alert Posting Configuration
Specifies whether alerts from the enabled alert group categories for
this configuration will be sent to the SNMP manager. If this option is
enabled, the following information must be entered:
•
SNMP Manager IP Address - specifies the IP address of the
SNMP trap manager
•
UDP Port - specifies the UDP port number used by the SNMP
trap manager for receiving trap messages. Acceptable values
are 162, and 49152 through 65535
•
Community Name - up to 15 character string specifying the trap
community name.
60