IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 207

PSF defined options:
*NONE
Text description:
Device resource library list:
Figure 30. Example CRTPSFCFG Command (V3R7 or V4R1)
NOTE: The lines in bold in Figure 30 are not used by PSF/400.
3. The following parameters are recommended:
a. PSF configuration (PSFCFG)
b. IPDS pass through (IPDSPASTHR)
NOTE: Not all SCS or IPDS spooled files are eligible for IPDS
c. Activate release timer (ACTRLSTMR)
d. Release timer (RLSTMR)
Configuring PSF/400 For IPDS On V3R7 Or V4R1
4400 Network Printer
*DFT
Instead, PSF/400 uses the information entered in the
device description screen.
The name used for this PSF configuration object. The
name must match the user-defined object name
(USRDFNOBJ) in the printer DEVD.
Specifies whether IPDS pass-through is done for the
device. This parameter defaults to *NO.
pass-through. Some files may contain special functions
that require transform to AFPDS for correct printing.
Specifying IPDS pass-through allows only those spooled
files eligible for IPDS pass-through to bypass the extra
transforms which may improve performance.
Specifies the point at which the release timer (RLSTMR) is
activated. Set to *NORDYF.
Specifies the amount of time to wait before a session or
dialog is released without terminating the writer. The
ACTRLSTMR parameter specifies when this timer is to be
activated. Set the parameter to a value at least equal to the
207