IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 268

Chapter 15
Complete Command List
set dest destination service [[-]socket][[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios]
[[-]ftpd]
example: set dest d1prn service -netbios
Set the destination to handle only certain print services. To
add a service, specify the service name. To disable a service,
use "
socket
lpd
lpsched
SMART
rprinter
SMART
pserver
netbios
ftpd
set dest from default
Set all destination settings back to factory defaults.
set dest from stored
Set all current destination settings to the values stored in flash
memory.
set logpath logpath name newname
example: set logpath l1 name pagecount
Change the current name of the logpath to a new name as
indicated by newname. This newname must be nine characters
or less or it will be truncated. These names are case sensitive.
268
" before the name. The available services are:
-
Direct socket printing via TCP/IP.
LPR printing with TCP/IP, including LPR
clients on any platform.
LP or System V printing with TCP/IP.
Novell RPRINTER support.
Novell PSERVER support.
Windows 95 and Windows for Workgroups
printing.
Printing using the File Transfer Protocol (FTP)
via TCP/IP.