Interfaces; 10/100Base-T - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 1

Interfaces

SMART
6. Load a specific printer configuration before processing a print
Interfaces
The Ethernet interacts with your printer through an Ethernet™
10/100Base-T interface connector.

10/100Base-T

The Ethernet Interface at the rear of the printer for the 10/100Base-
T interface has two indicator lights and two DIP switches, as shown
in Figure 2.
STAT (System Status)
NET (Data to Network)
Figure 2. Status Indicator Lights and DIP Switches
24
job
•
Specify a printer configuration to be associated with a print
queue.
•
When a job is set to that print queue, the associated printer
configuration will be loaded before the job is processed.
•
Feature allows you to define up to eight unique and
independent printer personalities in a single printer.
•
Allows you to effectively have eight different printers in one.
DIP Switches
1
2