Setting The Ethernet Interface Preferred Nds Tree (Nds Setups) - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Setting The Ethernet Interface Preferred NDS Tree (NDS Setups)

4. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a "User ID" and password first, type root for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the Ethernet Interface IP
address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell context context
4. Reset the unit to make the changes take effect:
reset
Setting The Ethernet Interface Preferred NDS
Tree (NDS Setups)
The Ethernet Interface supports Novell environments that have
multiple trees. If your environment has more than one tree you may
want to set a preferred tree. By default, the Ethernet Interface will
try to log in to each tree it finds until it is successful.
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a "User ID" and password first, type root for
the ID and press ENTER at the password prompt (since
there is no password by default).
157