Additional Information - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 12
Configuring for a *LAN 3812 SNMP Device Description
To look at the writer job, do the following:
NOTE: Check to see if the writer is still active.
1. On the OS/400 command line, type the following:
WRKJOB JOB(writer-name) The writer name is typically the
same name given to the device description. Press the Enter
key. This brings you to the Select Job panel or the Work with
Job panel. If you are at the Select Job panel, the most current
writer job is at the top of the list. Place a 1 in the Option field to
the left of the most recent WTR job and press the Enter key.
If the writer has ended, take menu option 4 (Work with spooled
files) on the Work with Job panel. From the Work with Job
Spooled Files panel, select Option 5 (Display) to display the
QPJOBLOG spooled file or Option 2 (Change) to requeue the
spooled file to a different output queue so it can be printed and
investigated. Make any suggested corrections, restart the wtr,
and re-submit the job.
If the writer is still active, select menu option 10 (Display job
log, if active or on job queue) on the Work with Job panel.
Press the F10 key and the Page Up and Page Down keys to
view the messages in the writer job log.

Additional Information

The success of *LAN 3812 SNMP device descriptions is dependent
on the configuration settings in OS/400 as well as on the printer and
print server hardware. For more information about configuring the
time-out values on the printer and print server hardware and
common error messages that you can receive when printing
through a *LAN 3812 SNMP device description, please refer to the
following document:
19935220 Configuration Settings and Error Messages for *LAN
3812 SNMP Device Descriptions located on the /400 support line
Knowledge base Web site.
250