Configuring Psf/400 For Ipds On V4R2 And Above - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 10
Configuring An IPDS Printer On The AS/400
Configuring PSF/400 for IPDS On V4R2 And
Above
To configure IPDS on the AS/400 V4R3, use the following
commands:
•
•
Configuring AFP with CRTPSFCFG on V4R3 and
above (Optional)
To configure the AS/400 for IPDS printing on V4R3:
1. At the AS/400 command line, enter a command in the form:
CRTPSFCFG PSFCFG(AFP/NETPRT4400) IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT('IBM 4400 NETWORK ATTACHED
PRINTER') PAGSIZCTL(*YES) ACTRLSTMR(*NORDYF)
2. A completed screen looks like Figure 32.
212
k. User-Defined Object (USRDFNOBJ)
To use a PSF configuration object, specify its name and
library here. This object type must be *PSFCFG. For V3R7
and higher, a single PSF configuration object may be
referenced by multiple device descriptions, if required.
CRTDEVPRT
CRTPSFCFG (Optional)