IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 274

Chapter 15
Complete Command List
SMART
set snmp trap index [-]active
SMART
set snmp emailaddr index emailaddress
SMART
set snmp emailformat index [-]short
SMART
set snmp shortmsglen index length
SMART
set snmp email index [-]active
274
Enable or disable an SNMP trap manager table entry.
The index is the index number of the SNMP trap manager
table. "active" enables the table entry, "-active" disables the
entry.
The Ethernet Interface can also send SNMP alert messages to
a desired e-mail address. To specify an e-mail address to send
alert messages to, use this command to add the e-mail address
to the SNMP alert table.
The index is the index number of the SNMP trap manager
table. The emailaddress is the desired e-mail address of the
form user@domain.com.
Enable or disable the short e-mail message format for an
SNMP alert table entry. When enabled, the short e-mail format
can be used when messages will be viewed on devices having
a limited display size (a cellular phone or pager, for example).
The index is the index number of the SNMP alert table. "short"
enables the short e-mail format, "-short" disables it.
Specify the length of the short e-mail message format for an
SNMP alert table entry. This command is effective only when
the short e-mail message format for an SNMP alert table entry
is enabled.
The index is the index number of the SNMP alert table.
"length" specifies the length of the short e-mail message, and
has an acceptable range of 15 to 80 characters.
Enable or disable sending e-mail alert messages for an SNMP
alert table entry.
The index is the index number of the SNMP alert table.
"active" enables the short e-mail format, "-active" disables it.