IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 208

Chapter 10
Configuring An IPDS Printer On The AS/400
e. Page Size Control (PAGSIZCTL)
Configuring PSF With CRTDEVPRT On V3R7 Or
V4R1
This section describes how to create a printer device description.
1. At the AS/400 command line, enter a command in the form:
CRTDEVPRT DEVD(NETPRT64) DEVCLS(*LAN) TYPE(*IPDS)
NOTE: Only use the USRDFNOBJ parameter if it was defined in
208
TIMEOUT value on the printer. The recommended value is
*SEC15.
Specifies if the page size (FORMS) is set by PSF.400.
Usually set to *YES.
MODEL(0) LANATTACH(*IP) AFP(*YES) PORT(5001)
FONT(11) FORMFEED(*CONT)
RMTLOCNAME('128.9.12.134')
USRDFNOBJ(AFP/5000NETPRT *PSFCFG)
TEXT('printer_type NETWORK PRINTER')
the previous procedure. See "Configuring AFP With
CRTPSFCFG On V3R7 Or V4R1 (Optional)" on page 205.