IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 290

Chapter 16
Printer Monitoring And Logging
To view the current logpath settings on the Ethernet Interface using
the Ethernet Interface internal command shell, npsh:
1. Telnet to the Ethernet Interface, and log in as root with no
password.
2. At the system prompt, enter the command to list the logpath
settings: list logpath
NOTE: If prompted for a "User ID" and password first, type in
To view the current logpath settings using the HTML forms on the
Ethernet Interface:
SMART
1. Direct your Web browser to URL
http://NICIPaddress/destConf.html
(e.g., http://192.75.11.9/destConf.html).
NOTE: If prompted for a "User ID" and password first, type in
2. At the "Print Path Configuration" HTML form that displays,
select a destination link (e.g., d1prn) from the top of the page to
bring up the appropriate destination form.
3. Once the desired destination HTML form displays, scroll down
to the "Logpath Type" and "Logpath Port" sections to view the
current logpath settings for this particular destination.
At this point, you can alter any of these settings and then click the
SUBMIT button to store them into the NIC. Remember to repower
the NIC to make the settings take effect.
290
for the ID and press ENTER at the password prompt
root
since there is no password by default.
for the ID and press ENTER at the password prompt
root
(since there is no password by default).