IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 233

Define the Printer to PSF/MVS
Each TCP/IP-attached printer must be defined to PSF with a
PRINTDEV statement in the PSF/MVS startup procedure.
Figure 35 shows a sample PSFPROC procedure that you can
modify to suit your installation. The PRINTDEV statement shows
the required IPADDR keyword.
No 4400 printer-specific writer procedure is currently supplied by
IBM. You can, however, copy the APSWPROT sample from the
APAR medium and modify it for the IBM 4400 printer.
NOTE: The IBM 4400 printer supports only resident symbol sets.
//PSFPROC PROC
//**************** IBM NETWORK PRINTERS WRITER PROCEDURE ****************
//*
//*01* MODULE-NAME = PSFPROC
//*
//*01* DESCRIPTIVE-NAME = START PROCEDURE FOR PSF:
//*TCP/IP ATTACHED IBM NETWORK PRINTERS
//*
//*01* NOTES = THE FULL NAME OF THE DEFAULT PAGEDEF IS
//*P1A06462.
//*THE FULL NAME OF THE DEFAULT FORMDEF IS
//*F1A10110.
//*THE FULL NAMES OF THE DEFAULT FONTS ARE
//*X0GF10, X0GS10, X0TU10, AND X0GU10.
//*THE FULL NAME OF THE SEPARATOR PAGE PAGEDEF IS
//*P1V06483.
//*THE FULL NAME OF THE SEPARATOR PAGE FONT IS
Define The Printer To PSF/MVS
Configuration Procedure
233