Snmp Installation Instructions; Configuring For A *Lan 3812 Snmp Device Description; Configuration Instructions - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

12
SNMP Installation
Instructions

Configuring for a *LAN 3812 SNMP Device Description

Support for SNMP is available in the base code for R450 OS/400
and above. *LAN 3812 SNMP device descriptions are similar to
*LAN 3812 PJL device descriptions, and they fully support the page
range function.

Configuration Instructions

To configure a 4400, for SNMP system device driver program, use
the CRTDEVPRT command. The following parameters should be
specified:
Device Class (DEVCLS)
This needs to be set to *LAN.
Device Type (TYPE)
This needs to be set to 3812.
Device Model (MODEL)
This needs to be set to 1.
LAN Attachment (LANATTACH)
This needs to be set to *IP.
243