IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 180

Chapter 8
OS/2 Workstation Configuration
e. Select all the ports with the mouse pointer and click on
6. The "\PIPE\LPDx - Setting" dialog box displays.
7. In the "LPD server" field, type the IP address of the Ethernet
Interface.
8. In the "LPD printer" field, type the name of the defined
destination/queue on the Ethernet Interface.
NOTE: This name must be the name of an existing destination/
9. Optionally, click "Help" to understand the other parameters and
enter those values.
10. Click "OK."
11. Click "Create." The print queue is created and placed in the
Printers folder or on the OS/2 desktop.
12. Make sure LPRPORTD is running. Press Ctrl-Esc and check the
list for a line that contains "LPRPORTD." If it is running, this
process is complete. If it is not running, enter the following at
the OS/2 command prompt:
start lprportd
You will probably want to put this command in your
"STARTUP.CMD" file, or use the TCP/IP Configuration tool to
set it to autostart on bootup.
Any print jobs sent to this queue will now be forwarded to the
Ethernet Interface.
180
"Install." The \PIPE\LPDx ports should now show in the
"Output port" list.
queue on the Ethernet Interface, and it must be lowercase
by default. Most likely you will most likely use d1prn. If the
IPDS feature is installed, queue name d4prn is not
available.