IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 147

Preferred File Server (NDS and Bindery Setups)
Adding Preferred File Server
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a "User ID" and password first, type in root
for the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the "Novell" section and add the name of the
preferred file server in the "File Server" field.
4. Click on the SUBMIT button when done and physically repower
the print server to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet ipaddress
NOTE: If prompted for a "User ID" and password first, type in root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the Ethernet Interface IP
address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell fserver add fservername
where fservername is the name of the Novell file server you
want to add as a preferred file server. This adds the specified
file server as a preferred file server on the Ethernet Interface.
4. Reset the unit to ensure the changes take effect.
reset
147