Table of Contents
Advertisement
Operator Alert Area
The following figure shows the controls on the Operator Alert Area, which is on
the base of the Operator Alert Assembly.
Using This Control:
Operator Alert
Assembly Volume
Control
External Connections
for Customers
Display Touch Screen
The Display Touch Screen provides you with a touch-sensitive interface to the
printer. "Chapter 4. Using the Display Touch Screen" on page 33 describes it in
detail.
Power Control Panel
On Printer 1 of a duplex system, the Power Control Panel provides power control
for the Printer Utility Module (PUM) frame and the printer engine. On Printer 2 of
a duplex system and on a simplex printer, the Power Control Panel provides direct
power control for the AFCCU frame and the printer engine. The Power Control
Panel also provides remote power control for Printer 1 in a duplex printing system.
Note: Although the switches are labeled "Control Unit" on this panel in the PUM
18
InfoPrint 3000 Operator's Guide
Does This:
Adjusts the volume of the operator alert assembly.
Provides customers with a set of external contacts to allow the
hook-up of an alert signal of the customer's choice.
frame of Printer 1, these switches control the power in the PUM frame, not
the AFCCU frame attached to Printer 2.
Advertisement
Table of Contents
