Novell Host Configuration; Netware Version 3.X Pserver Setup - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 6

Novell Host Configuration

3. At the "Administration Configuration" HTML form that displays,
highlight the field beside the "Name" heading and type in the
new name of the print server.
4. Click on the SUBMIT button when done and physically repower
the printer to make the new setting take effect.
Novell Host Configuration
SMART
Under all versions of NetWare, both PSERVER and RPRINTER
setups are supported by the Ethernet Interface. Since a PSERVER
setup is the most common, you will find the necessary steps to
configure the Ethernet Interface as a PSERVER shown first.
Configuration for RPRINTER and NPRINTER setup follow the
PSERVER information.
NOTE: In a NetWare environment the Ethernet Interface will

NetWare Version 3.x PSERVER Setup

To configure a print queue on a NetWare 3.x network:
1. Log on to the Novell file server as supervisor.
2. Enter PCONSOLE.
3. Select "Print Queue Information" from the PCONSOLE Main
Menu.
4. Press INSERT to add a new queue to the list of currently
defined queues showing.
5. Type in the name of this new queue when prompted and press
ENTER. This can be any name you would like.
6. Press ESCAPE to return to the Main Menu.
7. Select "Print Server Information" and press ENTER.
132
service only one of the four available printer objects (such
as d1prn); do not configure more than one printer object
from the printer. The Ethernet Interface cannot service
multiple file servers at one time; do not configure multiple
file servers to access the printer.