Netware Version 4.X And 5.X Rprinter Setup - IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual

Chapter 6
Novell Host Configuration

NetWare Version 4.x and 5.x RPRINTER Setup

The Ethernet Interface can be configured to service both
RPRINTER, NDS mode, and PSERVER, bindery mode.
Use the following procedure to set up an RPRINTER form of
attachment on a 4.x or 5.x server:
1. The Ethernet Interface requires a bindery server login on the 4.x
or 5.x as the first step to servicing RPRINTER. This bindery
login is necessary for registering the Ethernet Interface Pserver
name; no bindery queues or printers are set up. Using
PCONSOLE, bindery mode, create a bindery printer server
object whose name matches that of the Ethernet Interface at
the root context of the 4.x or 5.x box (e.g., M_03092B). After
creating the bindery PrintServer on the 4.x or 5.x server, reboot
the Ethernet Interface and use the debug Novell pserver
command via a Telnet or npsh session, or print out the E-NET
Test Page to make sure there is a successful server login.
2. Using either PCONSOLE in NDS mode or NWADMIN:
a. Create an NDS queue (any name you want), or simply use
b. Create a print server to use (any valid name, or choose one
c. Create a printer object to use with the print server object
NOTE: The 4.x or 5.x queue name, print server name, and printer
140
an existing one
already in existence)
you chose or created, and attach it to the chosen queue
object do not have to match any Ethernet Interface name;
multiple printers can be defined, but only one print server
can be attached to.
Example:
NDS queue name:
NDS print server name:
NDS printer name:
NDS printer name:
Finance
Fin_Q
Fin_Prt_1
Accounting_Prt_1