IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 276

Chapter 15
Complete Command List
set sysinfo contact contactname
example: set sysinfo contact Paul_Harris
Set a person or department to contact in case of print server
trouble.
set sysinfo prnserial printerserialnumber
example: set sysinfo prnserial 4400-001
Set the printer serial number for the Ethernet Interface. This is
for information purposes only, and does not affect the operation
of the print server in any way.
set sysinfo loginfo [-]sys | [-]tcp
example: set sysinfo loginfo -sys tcp
Set the Ethernet Interface debugging information type. Usually
this information includes unexpected errors or exceptions from
the print server divided into these groups:
sys
tcp
NOTE: This is not printer or job logging information.
set sysinfo logport null|syslog
example: set sysinfo logport null
Define to where the debugging information should be sent. This
can be sent to an output device off of the Ethernet Interface I/O
port or to a central TCP/IP host running a SYSLOG daemon.
To set TCP/IP host, use the command
syslog hostIPaddress
SMART
set sysinfo email emailaddress
example: set sysinfo email JohnDoe@IBM.com
Define the user email address to receive printer and job logging
information from a particular logpath on the Ethernet Interface.
Email name is the host or IP name of the user.
276
General system messages
TCP stack messages
set sysinfo
.