IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 271

SMART
set model model header headerstring
example: set model m7 header $FF
Set a header string to be sent to the printer at the start of any
print jobs passing through this model. The headerstring
can consist of up to nine elements. An example element is a
hexadecimal code (e.g., 0x04) or a pre-defined variable on the
print server (e.g., $FF for a formfeed). Use list var to see all
available variables.
SMART
set model model trailer trailerstring
example: set model m7 trailer $FF
Set a trailer string to be sent to the printer at the end of any
print jobs passing through this model. The trailerstring can
consist of up to nine elements. An example element is a
hexadecimal code (e.g., 0x04) or a predefined variable on the
print server (e.g., $FF for a formfeed). Use list var to see all
available variables.
SMART
set model model config [config_num]
Set the printer configuration number config_num to be loaded
prior to printing a job on the specified printer model. If
config_num is omitted, the model resets to the default, which
means no configuration is associated with it. If config_num is
0, the factory configuration loads before the job prints. If
config_num is in the range 1 through 8, the corresponding
configuration number loads before the job prints.
SMART
set model from default
Set all model settings back to factory defaults.
SMART
set model from stored
Set all current model settings to the values stored in flash
memory.
set prn [-]autofd
example: set prn -autofd
Assert or do not assert the AUTOFD line for carriage return
insertion. This only affects printers that support this function,
such as impact printers.
Set Commands
271